Current status and research trends in processing and application of titanium/steel composite plate

[1]

段恒杰. 钛钢复合板在真空制盐装置蒸发室的应用. 钛工业进展, 1993(1):19

Duan H J. Application of titanium/steel composite plate in evaporation chamber of vacuum salt making plant. Tit Ind Prog, 1993(1): 19

[2]

柴希阳. 船舶与海洋工程用钛/钢复合板轧制工艺与组织性能研究[学位论文]. 北京: 清华大学, 2018

Chai X Y. Study on Rolling Process, Microstructure and Properties of Titanium Clad Steel for Ship and Ocean Engineering [Dissertation]. Beijing: Tsinghua University, 2018

[3]

doi: 10.3969/j.issn.1009-9964.2005.04.010

高宝利, 李平仓, 华先锋, 等. 钛‒钢复合板在滨海电站凝汽器中的应用. 钛工业进展, 2005, 22(4):36

Tit Ind Prog, 2005, 22(4): 36

doi: 10.3969/j.issn.1009-9964.2005.04.010

Gao B L, Li P C, Hua X F, et al. Ti‒steel clad plate application in steam condenser of seashore station., 2005, 22(4): 36

[4]

闫力. 钛钢复合板的特点及应用领域. 中国钛业, 2011(3):12

Yan L. Behaviotsard applications of Ti/steel composite sheets. China Tit Ind, 2011(3): 12

[5]

doi: 10.3969/j.issn.1001-5388.2016.06.002

胡杰, 谢荣, 杜训柏. 钛钢复合板加工技术及其在船海工程中的应用. 江苏船舶, 2016, 33(6):6

Jiangsu Ship, 2016, 33(6): 6

doi: 10.3969/j.issn.1001-5388.2016.06.002

Hu J, Xie R, Du X B. Processing technology of titanium steel clad plate and its application in ship and ocean engineering., 2016, 33(6): 6

[6]

Lee M K, Lee J G, Choi Y H, et al. Interlayer engineering for dissimilar bonding of titanium to stainless steel. Mater Lett, 2010, 64(9): 1105

[7]

Chai X Y, Pan T, Chai F, et al. Interlayer engineering for titanium clad steel by hot roll bonding. J Iron Steel Res Int, 2018, 25(7): 739

[8]

Zhao D S, Yan J C, Wang C W, et al. Interfacial structure and mechanical properties of hot roll bonded joints between titanium alloy and stainless steel using copper interlayer. Sci Technol Weld Join, 2008, 13(8): 765

[9]

Sam S, Kundu S, Chatterjee S. Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties. Mater Des, 2012, 40: 237

[10]

Atasoy E, Kahraman N. Diffusion bonding of commercially pure titanium to low carbon steel using a silver interlayer. Mater Charact, 2008, 59(10): 1481

[11]

Deng Y Q, Sheng G M, Xu C. Evaluation of the microstructure and mechanical properties of diffusion bonded joints of titanium to stainless steel with a pure silver interlayer. Mater Des, 2013, 46: 84

[12]

王金友, 葛志明, 周彦邦. 航空用钛合金. 上海: 上海科学技术出版社, 1985

Wang J Y, Ge Z M, Zhou Y B. Aeronautical Titanium Alloy. Shanghai: Shanghai Scientific & Technical Publishers, 1985

[13]

doi: 10.3969/j.issn.1674-0971.2013.04.001

王怀柳. 钛及钛合金在船舶工业的应用现状及发展. 特钢技术, 2013, 19(4):1

Spec Steel Technol, 2013, 19(4): 1

doi: 10.3969/j.issn.1674-0971.2013.04.001

Wang H L. Application status and development of titanium and titanium alloy in shipbuilding industry., 2013, 19(4): 1

[14]

邢淑仪, 王世洪. 铝合金和钛合金. 北京: 机械工业出版社, 1987

Xing S Y, Wang S H. Aluminum and Titanium Alloys. Beijing: China Machine Press, 1987

[15]

Song T F, Jiang X S, Shao Z Y, et al. Microstructure and mechanical properties of vacuum diffusion bonded joints between Ti‒6Al‒4V titanium alloy and AISI316L stainless steel using Cu/Nb multi-interlayer. Vacuum, 2017, 145: 68

[16]

Kundu S, Chatterjee S. Effect of bonding temperature on interface microstructure and properties of titanium-304 stainless steel diffusion bonded joints with Ni interlayer. Mater Sci Technol, 2006, 22(10): 1201

[17]

Yu C, Qi Z C, Yu H, et al. Microstructural and mechanical properties of hot roll bonded titanium alloy/low carbon steel plate. J Mater Eng Perform, 2018, 27(4): 1664

[18]

Xie M X, Zhang L J, Zhang G F, et al. Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling. Mater Des, 2015, 87: 181

[19]

Zhao D S, Yan J C, Wang Y, et al. Relative slipping of interface of titanium alloy to stainless steel during vacuum hot roll bonding. Mater Sci Eng A, 2009, 499(1-2): 282

[20]

刘润生, 任连宝, 汪汉臣, 等. 大面积、薄覆层钛/钢复合板爆炸‒轧制工艺研究. 稀有金属快报, 2005, 24(1):18

Liu R S, Ren L B, Wang H C, er al. Study on explosive-rolling process of large-scale titanium/steel plate with thin cladding. Rare Met Lett, 2005, 24(1): 18

[21]

骆宗安, 杨德翰, 谢广明, 等. 真空制坯热轧钛/钢复合板工艺及性能. 钢铁研究学报, 2019, 31(2):213

Luo Z A, Yang D H, Xie G M, et al. Production process and performance of titanium-steel vacuum roll-cladding plates. J Iron Steel Res, 2019, 31(2): 213

[22]

黄金昌. NKK开发钛钢轧制复合板. 稀有金属快报, 2002(6):3

Huang J C. NKK develops titanium steel rolling clad plate. Rare Met Lett, 2002(6): 3

[23]

蒋淑英, 李世春. Ti‒Fe系金属间化合物价电子结构与性能分析. 稀有金属材料与工程, 2011, 40(1):36

Jiang S Y, Li S C. Analysis on valence electron structures and properties of intermetallic compounds in Ti‒Fe system. Rare Met Mater Eng, 2011, 40(1): 36

[24]

Rajabi A, Ghazali M J, Daud A R. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet: A review. Mater Des, 2015, 67: 95

[25]

柴希阳, 师仲然, 柴锋, 等. 加热温度对轧制钛/钢复合板组织与性能的影响. 稀有金属材料与工程, 2019, 48(8):2701

Chai X Y, Shi Z R, Chai F, et al. Effect of heating temperature on microstructure and mechanical properties of titanium clad steel by hot roll bonding. Rare Met Mater Eng, 2019, 48(8): 2701

[26]

Jiang H T, Yan X Q, Liu J X, et al. Effect of heat treatment on microstructure and mechanical property of Ti-steel explosive-rolling clad plate. Trans Nonferrous Met Soc China, 2014, 24(3): 697

[27]

杨德翰, 骆宗安, 谢广明, 等. 表面处理方式对钛/钢复合板界面结合性能的影响. 东北大学学报(自然科学版), 2018, 39(10):1396

Yang D H, Luo Z A, Xie G M, et al. Influence of surface treatment on interface bonding properties of titanium/steel composite plate. J Northeast Univ Nat Sci, 2018, 39(10): 1396

[28]

Yang D H, Luo Z A, Xie G M, et al. Effect of vacuum level on microstructure and mechanical properties of titanium-steel vacuum roll clad plates. J Iron Steel Res Int, 2018, 25(1): 72

[29]

Ghosh M, Das S, Banarjee P S, et al. Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Mater Sci Eng A, 2005, 390(1-2): 217

[30]

Kundu S, Chatterjee S. Diffusion bonding between commercially pure titanium and micro-duplex stainless steel. Mater Sci Eng A, 2008, 480(1-2): 316

[31]

Yu C, Xiao H, Yu H, et al. Mechanical properties and interfacial structure of hot-roll bonding TA2/Q235B plate using DT4 interlayer. Mater Sci Eng A, 2017, 695: 120

[32]

Song J, Kostka A, Veehmayer M, et al. Hierarchical microstructure of explosive joints: Example of titanium to steel cladding. Mater Sci Eng A, 2011, 528(6): 2641

[33]

Liu J X, Zhao A M, Jiang H T, et al. Effect of interface morphology on the mechanical properties of titanium clad steel plates. Int J Miner Metall Mater, 2012, 19(5): 404

[34]

Xie M X, Shang X T, Zhang L J, et al. Interface characteristic of explosive-welded and hot-rolled TA1/X65 bimetallic plate. Metals, 2018, 8(3): 159

[35]

Liu J G, Cai W C, Liu L, et al. Investigation of interfacial structure and mechanical properties of titanium clad steel sheets prepared by a brazing-rolling process. Mater Sci Eng A, 2017, 703: 386

[36]

Mudali U K, Rao B M A, Shanmugam K, et al. Corrosion and microstructural aspects of dissimilar joints of titanium and type 304L stainless steel. J Nucl Mater, 2003, 321(1): 40

[37]

doi: 10.3321/j.issn:1005-023X.2005.04.017

王敬忠, 颜学柏, 王韦琪, 等. 轧制钛‒钢复合板工艺综述. 材料导报, 2005, 19(4):61

Mater Rev, 2005, 19(4): 61

doi: 10.3321/j.issn:1005-023X.2005.04.017

Wang J Z, Yan X B, Wang W Q, et al. Summarization of the rolling Ti‒steel composite plates process., 2005, 19(4): 61

[38]

王敬忠, 颜学柏, 王韦琪, 等. 带夹层材料的爆炸‒轧制钛钢复合板工艺研究. 稀有金属材料与工程, 2010, 39(2):309

Wang J Z, Yan X B, Wang W Q, et al. Titanium cladding steel plates with interlayer by explosion and rolling bonding. Rare Met Mater Eng, 2010, 39(2): 309

[39]

Ha J S, Hong S I. Deformation and fracture of Ti/439 stainless steel clad composite at intermediate temperatures. Mater Sci Eng A, 2016, 651: 805

[40]

祖国胤. 层状金属复合材料制备理论与技术. 沈阳: 东北大学出版社, 2013

Zu G Y. Theories and Technologies of Preparation Layered Metal Composite. Shenyang: Northeastern University Press, 2013

[41]

Prasanthi T N, Ravikirana C S, Saroja S. Explosive cladding and post-weld heat treatment of mild steel and titanium. Mater Des, 2016, 93: 180

[42]

Zu G Y, Sun X, Zhang J H. Interfacial bonding mechanism and mechanical performance of Ti/steel bimetallic clad sheet produced by explosive welding and annealing. Rare Met Mater Eng, 2017, 46(4): 906

[43]

Manikandan P, Hokamoto K, Deribas A A, et al. Explosive welding of titanium/stainless steel by controlling energetic conditions. Mater Trans, 2006, 47(8): 2049

[44]

Mousavi S A A A, Sartangi P F. Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel. Mater Des, 2009, 30(3): 459

[45]

Manikandan P, Hokamoto K, Fujita M, et al. Control of energetic conditions by employing interlayer of different thickness for explosive welding of titanium/304 stainless steel. J Mater Process Technol, 2008, 195(1-3): 232

[46]

Findik F. Recent developments in explosive welding. Mater Des, 2011, 32(3): 1081

[47]

江海涛, 阎晓倩, 刘继雄, 等. 钛‒钢爆炸复合板热处理过程中的扩散行为及数学模型. 稀有金属材料与工程, 2015, 44(4):972

Jiang H T, Yan X Q, Liu J X, et al. Diffusion behavior and mathematical model of Ti‒steel explosive clad plate during heat treatment. Rare Met Mater Eng, 2015, 44(4): 972

[48]

Rao N V, Sarma D S, Nagarjuna S, et al. Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic stainless steel. Mater Sci Technol, 2009, 25(11): 1387

[49]

Jiang H T, Yan X Q, Liu J X, et al. Influence of asymmetric rolling parameters on the microstructure and mechanical properties of titanium explosive clad plate. Rare Met Mater Eng, 2014, 43(11): 2631

[50]

Orhan N, Khan T I, Eroğlu M. Diffusion bonding of a microduplex stainless steel to Ti–6Al–4V. Scripta Mater, 2001, 45(4): 441

[51]

Ghosh M, Chatterjee S. Characterization of transition joints of commercially pure titanium to 304 stainless steel. Mater Charact, 2002, 48(5): 393

[52]

Ghosh M, Chatterjee S. Diffusion bonded transition joints of titanium to stainless steel with improved properties. Mater Sci Eng A, 2003, 358(1-2): 152

[53]

Kundu S, Ghosh M, Laik A, et al. Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Mater Sci Eng A, 2005, 407(1-2): 154

[54]

Eroglu M, Khan T I, Orhan N. Diffusion bonding between Ti‒6Al‒4V alloy and microduplex stainless steel with copper interlayer. Mater Sci Technol, 2002, 18(1): 68

[55]

Kundu S, Chatterjee S. Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer. Mater Sci Eng A, 2006, 425(1-2): 107

[56]

He P, Yue X, Zhang J H. Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer. Mater Sci Eng A, 2008, 486(1-2): 171

[57]

Kundu S, Chatterjee S. Evolution of interface microstructure and mechanical properties of titanium/304 stainless steel diffusion bonded joint using Nb interlayer. ISIJ Int, 2010, 50(10): 1460

[58]

Kundu S, Sam S, Mishra B, et al. Diffusion bonding of microduplex stainless steel and Ti alloy with and without interlayer: interface microstructure and strength properties. Metall Mater Trans A, 2014, 45(1): 371

[59]

余超, 吴宗河, 郭子楦, 等. 热轧钛/钢复合板显微组织和性能. 钢铁, 2018, 53(4):42

Yu C, Wu Z H, Guo Z X, et al. Microstructure and properties of hot-rolled bonded titanium clade steel plate. Iron Steel, 2018, 53(4): 42

[60]

Wang C Y, Jiang Y B, Xie J X, et al. Effect of the steel sheet surface hardening state on interfacial bonding strength of embedded aluminum-steel composite sheet produced by cold roll bonding process. Mater Sci Eng A, 2016, 652: 51

[61]

Tang C, Liu Z, Zhou D, et al. Surface treatment with the cold roll bonding process for an aluminum alloy and mild steel. Strength Mater, 2015, 47(1): 150

[62]

刘雪峰, 白于良, 李晶琨, 等. 冷轧成形钛/钢层状复合板界面结合强度的影响因素. 材料工程, 2020, 48(7):119

Liu X F, Bai Y L, Li J K, et al. Influence factors of interfacial bonding strength of cold rolled titanium/steel laminated composites plates. J Mater Eng, 2020, 48(7): 119

[63]

Qin B, Sheng G M, Huang J W, et al. Phase transformation diffusion bonding of titanium alloy with stainless steel. Mater Charact, 2006, 56(1): 32

[64]

Kundu S, Ghosh M, Chatterjee S. Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Mater Sci Eng A, 2006, 428(1-2): 18

[65]

Li B X, Chen Z J, He W J, et al. Effect of interlayer material and rolling temperature on microstructures and mechanical properties of titanium/steel clad plates. Mater Sci Eng A, 2019, 749: 241

[66]

Luo Z A, Wang G L, Xie G M, et al. Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer. Acta Metall Sin-Engl Lett, 2013, 26(6): 754

[67]

Zhao D S, Yan J C, Liu Y J, et al. Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer. Trans Nonferrous Met Soc China, 2014, 24(9): 2839

[68]

Yan J C, Zhao D S, Wang C W, et al. Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer. Mater Sci Technol, 2009, 25(7): 914

[69]

Rahman A H M E, Cavalli M N. Strength and microstructure of diffusion bonded titanium using silver and copper interlayers. Mater Sci Eng A, 2010, 527(20): 5189

[70]

陈泽军, 周廷, 李博新, 等. 钒中间层钛/钢复合板结合界面结构与力学性能. 塑性工程学报, 2019, 26(1):188

Chen Z J, Zhou T, Li B X, et al. Interfacial structure and mechanical properties of titanium clad steel plates with vanadium interlayer. J Plast Eng, 2019, 26(1): 188

[71]

Yang D H, Luo Z A, Xie G M, et al. Interfacial microstructure and properties of a vacuum roll-cladding titanium-steel clad plate with a nickel interlayer. Mater Sci Eng A, 2019, 753: 49

[72]

宋品玲, 叶建林, 张成. 大型钛钢复合板设备制造过程中的质量控制技术. 四川兵工学报, 2012, 33(11):80

Song P L, Ye J L, Zhang C. Quality control technology in manufacturing process of large titanium steel clad plate equipment. J Sichuan Military Technol, 2012, 33(11): 80

[73]

doi: 10.3969/j.issn.1009-3281.2016.05.005

张秀锋. 大型钛钢复合板塔器泄漏原因分析及现场返修措施. 化工设备与管道, 2016, 53(5):15

Process Equip Pip, 2016, 53(5): 15

doi: 10.3969/j.issn.1009-3281.2016.05.005

Zhang X F. Cause analysis of leakage occurred in large titanium clad steel column and onsite repairing measures., 2016, 53(5): 15

[74]

doi: 10.3969/j.issn.1672-6103.2019.05.017

欧阳灿. 湿法冶金加压酸浸钛钢复合板反应釜设计探讨. 中国有色冶金, 2019(5):65

China Nonferrous Metall, 2019(5): 65

doi: 10.3969/j.issn.1672-6103.2019.05.017

Ouyang C. Discussion on the design of pressure acid leaching titanium steel composite board reactor for hydrometallurgy., 2019(5): 65

[75]

张成, 孙万仓. 钛制换热器结构的分析和设计优化. 钛工业进展, 2016, 33(4):40

Zhang C, Sun W C. Structure analysis and optimization of titanium heat exchanger. Tit Ind Prog, 2016, 33(4): 40

[76]

doi: 10.3969/j.issn.1008-4800.2018.12.160

夏宜岑. 钛制压力容器设计中的问题. 化工管理, 2018(12):196

Chem Enterprise Manage, 2018(12): 196

doi: 10.3969/j.issn.1008-4800.2018.12.160

Xia Y C. Problems in the design of titanium pressure vessels., 2018(12): 196

[77]

doi: 10.3969/j.issn.1009-3281.2010.04.001

陈襄颐, 郑宝山. 大型钛钢复合板压力容器的设计. 化工设备与管道, 2010, 47(4):1

Process Equip Pip, 2010, 47(4): 1

doi: 10.3969/j.issn.1009-3281.2010.04.001

Chen X Y, Zheng B S. Design of large pressure vessel manufactured by titanium cladding steel plate., 2010, 47(4): 1

[78]

吕刚. 关于火电厂烟囱钛钢复合板制造及施工注意事项. 世界有色金属, 2017(13):273

Lü G. About the manufacture and construction of thermal power plant chimney clad plate note. World Nonferrous Met, 2017(13): 273

[79]

doi: 10.3969/j.issn.1673-6214.2017.04.004

王礼营, 谢刚, 王茹, 等. 火电厂脱硫烟囱用钛/钢复合板钛覆层腐蚀试验研究. 失效分析与预防, 2017, 12(4):222

Fail Anal Prev, 2017, 12(4): 222

doi: 10.3969/j.issn.1673-6214.2017.04.004

Wang L Y, Xie G, Wang R, et al. Corrosion resistance of titanium/steel clad plates for desulphurization chimney of power plants., 2017, 12(4): 222

[80]

Su H, Luo X B, Chai F, et al. Manufacturing technology and application trends of titanium clad steel plates. J Iron Steel Res Int, 2015, 22(11): 977

[81]

卢洪伟, 武桂彬, 樊新利. 电厂钛钢复合板烟囱内筒焊接质量控制. 河北电力技术, 2015, 34(增刊): 19

Lu H W, Wu G B, Fan X L. Welding quality management of titanium clad steel plate chimney tube in power plant. Hebei Electr Power, 2015, 34(Suppl): 19

[82]

吴静怡. 中间层及热处理对热轧钛‒钢复合界面组织及结合性能的影响研究[学位论文]. 北京: 钢铁研究总院, 2017

Wu J Y. Effect of Interlayers and Heat Treatments on Interfacial Microstructure and Bonding Properties of Hot Rolled Titanium-Steel Clad Plate [Dissertation]. Beijing: Central Iron & Steel Research Institute, 2017

[83]

吴全兴. 钛钢复合材在超大型海洋浮式构筑物上的适用研究. 钛工业进展, 1997(3):27

Wu Q X. Study on the application of titanium steel composite in super large floating structure. Tit Ind Prog, 1997(3): 27

[84]

Sahasrabudhe H, Harrison R, Carpenter C, et al. Stainless steel to titanium bimetallic structure using LENS™. Addit Manuf, 2015, 5: 1

[85]

Miriyev A, Stern A, Tuval E, et al. Titanium to steel joining by spark plasma sintering (SPS) technology. J Mater Process Technol, 2013, 213(2): 161

[86]

Kim K H, Watanabe M, Mitsuishi K, et al. Impact bonding and rebounding between kinetically sprayed titanium particle and steel substrate revealed by high-resolution electron microscopy. J Phys D Appl Phys, 2009, 42(6): 065304

[87]

Lee J G, Hong S J, Lee M K, et al. High strength bonding of titanium to stainless steel using an Ag interlayer. J Nucl Mater, 2009, 395(1-3): 145

[88]

Elrefaey A, Tillmann W. Evaluation of transient liquid phase bonding between titanium and steel. Adv Eng Mater, 2009, 11(7): 556

[89]

doi: 10.3969/j.issn.1009-7864.2016.05.002

曾周燏, 王光磊, 江姗, 等. 真空轧制钛/钢复合板的组织与性能. 宽厚板, 2016, 22(5):6

Wide Heavy Plate, 2016, 22(5): 6

doi: 10.3969/j.issn.1009-7864.2016.05.002

Zeng Z Y, Wang G L, Jiang S, et al. Microstructure and mechanical properties of titanium clad steel plate by vacuum rolling cladding., 2016, 22(5): 6

[90]

doi: 10.3969/j.issn.1006-4613.2018.04.006

蒋健博, 王长顺, 及玉梅, 等. TA2/Q345B钛钢复合板复合界面缺陷分析. 鞍钢技术, 2018(4):21

Angang Technol, 2018(4): 21

doi: 10.3969/j.issn.1006-4613.2018.04.006

Jiang J B, Wang C S, Ji Y M, et al. Analysis on defects at composite interface of TA2/Q345B titanium clad steel plate., 2018(4): 21

[91]

刘雪峰, 王怀柳, 白于良, 等. 一种高性能钛/钢双金属复合板的制备方法: 中国专利, CN201910954923.3. 2020-1-10

Liu X F, Wang H L, Bai Y L, et al. A Preparation Method of High Performance Titanium/Steel Bimetal Composite Plate: China Patent, CN201910954923.3. 2020-1-10

[92]

刘雪峰, 石章智, 白于良, 等. 一种异种金属界面实现强冶金结合的制备方法: 中国专利, CN201810507752.5. 2018-11-16

Liu X F, Shi Z Z, Bai Y L, et al. A Preparation Method of Strong Metallurgical Bonding between Dissimilar Metals: China Patent, CN201810507752.5. 2018-11-16