To select an FLC2000 replacement flat screen, first confirm the exact shaker configuration and screen-retention system, then match the panel dimensions, screen construction, and separation requirement. The FLC2000 name alone is not enough to verify fit: equipment versions, previous modifications, and screen designs can affect interchangeability. Yuanpeng can review your equipment details and operating requirements to help identify a suitable replacement, subject to confirmation of the required dimensions and interface.
If you are looking for more details, kindly visit our website.
This guide is for drilling contractors, solids-control teams, maintenance buyers, and distributors sourcing replacement screens for FLC2000 shale shakers. It is useful when preparing a first inquiry, comparing supplier quotations, or checking whether an available screen is likely to fit existing equipment. It does not replace a physical fit check or confirmation against the specific shaker and screen assembly.
For an accurate quotation, share the shaker identification information, screen-retention details, required mesh or cut-point target, and order quantity. If the installed screen is available, a representative sample and clear photographs can help resolve questions that a model name alone cannot answer. Treat any dimensions or mesh recommendations as project-specific until confirmed with the supplier.
An FLC2000 replacement flat screen is a removable screening panel intended for use on a compatible FLC2000 shaker configuration. Its screening surface separates solids from drilling fluid as material passes across the vibrating shaker deck. The panel must both fit the machine’s screen supports and provide a screening specification appropriate for the drilling operation.
The screen’s primary function is to retain particles above its effective separation range while allowing fluid and smaller particles to pass through. In practice, performance is influenced by more than the nominal mesh designation: fluid properties, solids loading, shaker settings, and screen condition also matter. Buyers should therefore specify the required separation objective and operating context, rather than selecting on mesh number alone.
These replacement screens are generally considered for solids-control operations where an FLC2000 shaker is installed, including drilling-fluid processing and related field or service-company operations. Actual suitability depends on the equipment configuration, drilling program, fluid characteristics, and required solids-removal stage. Confirm application details with your technical team before ordering a different screen specification.
Replacement flat screens may differ in frame construction, screening layers, support structure, and material selection. A supplier may offer options such as metal or composite frame designs, depending on the product range and the compatibility requirements. Do not assume that a different construction is interchangeable simply because the panel has a similar outline.
Ask the supplier to identify the offered construction and explain how it relates to your shaker’s support and retention arrangement. If you are replacing a screen with a different material or design, confirm the external dimensions, seating points, and any relevant operating limitations before purchase. Yuanpeng can review supplied photos, drawings, or a sample to help clarify the required configuration.
If you want to learn more, please visit our website Yuanpeng.
| Specification | What to confirm | Why it matters |
|---|---|---|
| Equipment and screen interface | Shaker identification, deck position, retention or clamping arrangement | Helps establish whether the panel can seat and be secured correctly |
| Panel dimensions | Overall length, width, thickness, and relevant contact or support points in mm | Supports a dimensional comparison with the installed screen and machine |
| Screening specification | Mesh designation, requested API designation where applicable, or target separation requirement | Connects the screen choice to the process objective |
| Construction | Frame and screening-layer material, support design, and replacement style | Helps assess mechanical fit and suitability for the working environment |
| Order requirements | Quantity, destination, requested delivery window, and packaging needs | Allows the supplier to prepare a relevant quotation and schedule |
Record measurements using millimeters and state how each measurement was taken. For example, a dimensional note might be written as “1050 mm × 695 mm × 40 mm”; this is only an example of measurement format, not an FLC2000 screen specification. Verify your actual values against the panel, drawing, or equipment documentation before sending them for confirmation.
One sample screen and three clear photographs—front, rear, and side—are useful starting points for a compatibility review, although a supplier may request additional information. If no physical sample is available, provide a drawing or measurements of the panel and support arrangement. This evidence-led process is more reliable than matching by product name alone.
A finer screen may support a tighter separation objective, but it can also affect fluid handling and solids loading on the screen surface. A coarser specification may be appropriate in a different stage or operating condition, but the choice should reflect the drilling program and solids-control plan. We recommend confirming proposed changes with the responsible drilling-fluid or solids-control specialist rather than assuming that finer is always better.
The price of a replacement screen depends on the confirmed design, materials, screening specification, order quantity, and delivery destination. Minimum order quantity, production schedule, and freight arrangements are supplier- and order-specific, so they should be confirmed in a current quotation. Avoid comparing prices until the quoted screens are aligned on fit, construction, and screening requirement.
For a useful quotation, send the required quantity, destination, target delivery window, and any packaging or labeling requirements with the technical details. Ask the supplier to state the quotation validity, production or dispatch estimate, shipping terms, and any minimum quantity in writing. A clear quotation makes it easier to compare the total sourcing requirement rather than unit price alone.
Ask for written confirmation of the agreed product details and retain the final drawing or specification with your purchase records. If the supplier cannot explain a key fit dimension or leaves the screening designation ambiguous, request clarification before approving the order. Yuanpeng can support B2B buyers with specification review and quotation preparation based on the information provided.
The right FLC2000 replacement flat screen is the one that matches both the shaker’s physical interface and the operation’s separation needs. The model name is a useful starting point, but it is not sufficient proof of compatibility. Confirm dimensions, retention arrangement, construction, and screening specification before ordering.
To begin a Yuanpeng inquiry, prepare your equipment details, measured panel dimensions in mm, photographs or a sample, target screening specification, order quantity, and delivery destination. We can review these requirements and provide a quotation for the proposed replacement configuration. Confirm the final fit and product details before purchase so your sourcing decision is based on the actual equipment and application.
Contact us to discuss your requirements of FLC2000 Replacement flat screens. Our experienced sales team can help you identify the options that best suit your needs.