A long time ago, I wanted to make my first bucket hat, for my (then) toddler.
But it looked so hard to sew a simple bucket hat!
So I started looking for sewing shortcuts. And messed with those poor bucket hat pieces until I found an easier way to sew it. A lot easier, actually. So I made this tutorial - it's beginner-friendly.
Fast forward years of testing (and my kids outgrowing the smallest sizes) - and here's my new bucket hat pattern. It comes in 5 sizes and it's free.
And it gets even better: this is a reversible bucket hat - no raw seams exposed. Yay! Give this easy bucket hat sewing project a try!
This post contains affiliate links. Thanks for your support. You'll find tons of easy accessory sewing ideas here, including
Whether you're headed to the beach, working in the garden, or just going outside in the warmer months - this reversible hat is a must-have.
I want to help you make your own bucket hat in the size you need, the color you want, and the fabric you choose. Are you with me? Read on, below is an easy bucket hat tutorial with a free printable bucket hat pattern waiting for you - in 5 sizes!
Here's why I love this free pattern for bucket hat - and why you might too:
And, readers say this might be the best step-by-step tutorial on how to make a hat. (Seriously. Daily, I get emails from people that are NEW to sewing, saying it was way easier than they expected.) - Meaning YOU can sew it too!
And here it comes ... another cute hat photo. I'll be bold and say this might be the best free bucket hat sewing pattern out there. After all, it's been tested and tweaked for years, by a person who's pretty picky about store-bought stuff haha!
These reversible bucket hat sizes are a bit on the larger side - the pattern, I mean. If you want a tight fit, go for a smaller size, but it's better not to go too small as the hat will always shrink a little after a few washes. Also, it should be comfortable. Also see sizing tips at the end of this diy hat tutorial.
First, I need to admit that a classic bucket hat project might not be easy to sew, especially not for beginners.
But I'll show you how I used a shortcut, to make the project way easier. It's a different construction process, differing from the industry-standard procedure in sewing a bucket hat.
The result will be the same - but sewing will be way easier. Are you with me?
Gather these supplies before you start sewing the bucket hat:
The seam allowance for this project is ⅜" inch (1cm). This free pattern for bucket hat comes in 5 sizes, so you'll first need to decide on the size you want to sew.
Get the template from the shop here - it's absolutely FREE! Print and start cutting and sewing right now.
I’ve created a template that you can download for free. To download the FREE Bucket Hat TEMPLATE, click the button below. You'll be taken to the shop - scroll to Bucket Hat Pattern, it's $0!
Get the free pattern HERE. It's $0 in the shop, no code is needed. Optional, as an alternative:
OR do you want a printable copy of the WHOLE tutorial? Scroll to the bottom of this tutorial for more details!
After you've decided on the hat size, use the paper pattern (see note above) to cut out these pieces from fabric:
Pattern piece nameCut from Outer Fabric:Cut from LiningFabric:CROWN piece1 piece1 pieceSIDE piece2 pieces2 piecesBRIM piece2 pieces2 piecesAnd here's a little image to help you visualize the pattern layout. Here's what the parts of the hat are called in this tutorial:
Parts of a bucket hat - how to sew bucket hat pieces togetherAnd this is the way to place your pattern on the fabric when cutting:
You'll end up with two identical sets of pieces, one from Outer and one from Lining fabric.
Make sure to mark the pieces - make tiny notches in the center of all Sides and Brims and transfer the markings from the Crown pattern piece. This will make your sewing so much easier later on:
Pair all the Brim and the Side pieces, placing each pair with the right sides together and pin.
With the right sides together, sew all the short edges together, using a ⅜" or 1 cm seam allowance. You get 4 circular (slightly oval, actually) bands, two full brims and two full sides:
Press all seam allowances open.
Now, let's make one color first: the Outer. Take the 'Sides' circular band and the round Crown piece.
Cut tiny notches, slits into the fabric on the shorter raw edge of the Sides piece to make the pieces match. I clipped tiny notches approximately ¼" (½ cm) into the seam allowance. Take your time. Then pin or clip the two pieces together:
IMPORTANT: the double-notch mark (‘W’ mark) on the oval Crown piece means the FRONT and the BACK of the hat. Align the double-notch (‘W’ mark) with the seams on the Sides piece.
And here's another photo for those who prefer pins:
From here on, it just gets easier: just sew all the way around, using a ⅜" or 1 cm seam allowance:
Then press the seam allowance towards the Sides and top stitch around for a nicer look. Feel free to use whatever distance from the seam you prefer - anything between ⅛" and ¼" (3-8 mm) should work just fine.
The top of the hat will look so professionally made!
Take the Brim piece and pin it to the cap with the fabric right sides together. Again, match the notch markings. Also, it will help you a lot if you cut tiny slits into the narrower part of the Brim piece - just like you did above with the Crown piece.
Then sew around using a ⅜" or 1 cm seam allowance:
To make the seam look prettier, press the seam allowance towards the brim and topstitch the Brim, like you did in Step 5:
Repeat the steps with the Lining fabric pieces, and you've got yourself these two identical parts of your soon-to-be bucket hat:
Put the two 'hats' together with the right sides facing each other, with the side seams on the brim aligned. Sew the brims (i.e. the largest circle) together, using a ⅜" or 1 cm seam allowance and make sure to leave a 3" or 7.5 cm opening. You'll need it to turn the hat right-side-out.
Trim the seam allowance using pinking shears.
Now turn it right side out through the opening and you've basically made it!
Press the brim so you get an even outer edge. Sew the opening closed or proceed with the next, finishing step.
Now, the only thing left to do is to topstitch the brim for stability. See the lines all the way around the edges of the brim on the completed hat? Sew circles around the brim to add stability to the brim.
I used the edge of my machine sewing foot to eyeball the distance between the seam lines, but I never demand perfection from myself. 5 or 6 rows will give enough stability to the brim - even if sewn with quilting cotton, like all these in the tutorial. You can mark them using a fabric pen, spaced ½" or ⅜" apart.
But honestly, I never have the patience to mark. Hence the wiggly seams. I simply call them a 'feature'. LOL
Good job, you've made it through! If you liked this blog post, share it in your favorite Facebook group - or join ours to show when you sew one up!
I want to help you make the best diy bucket hat, and a little help goes a long way!! Here I'm answering the most frequent questions people ask me about sewing this hat:
I decided to put down ½ yard per print in the supplies section, making it a total of 1 yard.
But you can get away with way less fabric if you rearrange and turn pattern pieces for the most economical use of the fabric, with the least leftover possible.
This way, you could even squeeze two hats out of a yard/meter of fabric! But be cautious, as the different cutting could cause the fabric pieces to shrink in different directions once washed. It could distort your bucket hat form. And this is why it's good to use a bit more fabric to ensure the same direction, 'grainline'.
Here's a bonus tip for topstitching the brim: choose a thread matching the fabric color for topstitching. I used teal thread for the outer layer and grey in the bobbin. This way, any uneven curves will be hardly noticeable - or better yet, not at all.
My favorite: densely woven cotton - be it canvas, twill, or simply quilting cotton. And denim is amazing for bucket hats! As it's a double-layer hat, you'll get enough stability without the use of any interfacing.
Oh, you're asking how do I line this bucket hat? Good news, I don't need to! As it's a double-layer hat, you'll get enough stability without the use of interfacing.
You can of course choose to use some light- or medium-weight interfacing if you either used very lightweight fabric or want a firm bucket hat. In this case, I'd fuse interfacing to one layer only, not both Outer and Lining.
Quite a few readers have asked me how to make a bucket hat with a ponytail hole at the back, to keep those long hair off the neck in the hot summer sun.
Has anyone added a ponytail hole to the bucket hat? Are there pics or a tutorial to do this?
Dawn, question posted in AGC FB group
A diy bucket hat with a ponytail hole is a great idea, and I have an easy diy addition to this tutorial on my mind already! I've put it on my to-do list. However, if you'll be attempting this with AppleGreen Cottage bucket hat pattern, please note that the ponytail hole needs to be located at one of the VERTICAL seams of the Sides piece. Which - makes it even easier! I'm itching to try this option! I'll be making a tutorial for a discreet slit at the back of the hat (not a big gaping hole) on my pattern. Get ready for a bucket hat featuring a clever little ponytail slit to keep hot hair off your kids' little necks!
Bucket hats should first and foremost be comfortable. If your hat sits too tight, you may feel some tension, and that's too small. Also, it depends on thick your hair is: think a bucket hat on a shaved head versus a hat on a head with thick, voluminous curly hair! That's good to consider - along with measuring your head circumference before you start sewing.
Also, natural fibers in hats can cause gradual shrinking over time. Cotton will shrink, especially after several washes. This is why I've designed this bucket hat pattern a bit larger than usual. I've made my portion of too-small hats, and now, I'd rather make it a bit larger and toss it into the washer (and, if needed, even dryer!!) to get it to the 'final' size.
And one last thing I learned (many times!) about a child head: it grows fast, so make sure to sew one hat more - in the next size for your kid. This way, you'll have their next favorite summer hat ready for when they outgrow their current hat.
Please note that this pattern has been thoroughly tested for years (and used) before I made it free as a gift to everyone visiting AppleGreen Cottage. 3 reasons why the sizing on your sewn bucket hat could be off:
1 - These reversible bucket hat sizes are a few millimeters on the larger side - the pattern, I mean. This is to account for any slightly imperfect (wiggly?) seam on the brim piece (see step 6) - I know they do happen to me when sewing curves.
2 - Select the right pattern size by first measuring the head circumference of the person who'll wear it. If you want a tight fit, go for a smaller size, but it's better not to go too small as the hat will always shrink a little after a few washes. Also, it should be comfortable.
3 - Use the exact seam allowance as indicated on the pattern pieces. Please note that since thousands of people have been using this pattern, I've come to realize that sometimes, one could easily forget to follow the exact seam allowance listed in the pattern:
It's all in the brim 🙂 You can either keep the brim turned somewhat down, or you can turn your brim up in the front to reveal more of your face - that would result in a more casual bucket hat look. You can dress it up by pairing it with an elevated outfit, or you can match a bucket hat with your casual clothing (THIS!). Have fun!
Now go, make one pretty bucket hat for yourself, and then for all your loved ones. Super popular with kids, especially if mixed with their favorite prints. (Dinos, anyone?) Also, it makes a perfect men's bucket hat too.
Now you can start making your own stylish diy hat collection - I want to see all the cute bucket hats you make! No time to sew now? Save this diy bucket hat pattern and tutorial for later, so you can get your own pdf file any time.
Do you want an ad-free, printable copy of this online tutorial? Find it here for just $3. You won’t need to access the internet every time you want to make it. ------ Or get the BUNDLE with ALL the Printable Tutorials - current and future ones!
Get email updates and never miss out on new patterns, printables, and tutorials:
Or …check out the Earwarmer Headband pattern in 8 Sizes in our shop:
Get The Earwarmer Headband PATTERN HERE.Also, check out this cute earflap beanie pattern in our shop:
Get Pattern HEREAn excellent choice for everyone who has children and would love to see their ears protected in the fresh fall (or spring) wind.
Share on
PinterestFor more information asian bucket hat, black bucket hat with string, army green bucket hat, please get in touch with us!